China RV Series Reduction Gear Machine with Right Angle Shaft bevel gear set

Merchandise Description

RV Series Reduction equipment device With Correct Angle Shaft

NMRV 571-one hundred fifty worm equipment box with flange and electric powered motor
NMRV+NMRV Double Stage Arrangement Reduction Gear Box
RV Collection Worm Gearbox
worm pace reducer
nmrv worm equipment motor

RV Series
Such as RV / NMRV / NRV.
Principal Characteristic of RV Sequence Worm Gearbox
RV collection worm gear reducer is a new-technology product created by CZPT on the basis of perfecting WJ series merchandise with a compromise of innovative engineering both at home and overseas.
1. Large-top quality aluminum alloy, mild in weight and non-rusting.
two. Big in output torque.
3. Smooth managing and low sound,sturdy in dreadful conditions.
four. High radiation efficiency.
five. Very good-seeking appearance, sturdy in provider daily life and modest quantity.
six. Appropriate for omnibearing installation.
Major Components of RV Sequence Worm Gearbox
1. Housing: die-solid aluminum alloy(body measurement: 571 to 090), cast iron(frame measurement: one hundred ten to a hundred and fifty).
two. Worm: 20Crm, carbonization quencher warmth treatment makes the surface hardness of worm gears up to fifty six-sixty two HRX, keep carbonization layer’s thickness amongst .3 and .5mm soon after specific grinding.
3. Worm Wheel: wearable stannum bronze alloy.

SPEED RATIO seven.5~a hundred
OUTPUT TORQUE <1050NM
IN POWER .09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

 

When doing work, excellent load ability, stable managing, minimal sounds with  higher effectiveness.
  Equipment Box’s Use Field
1 Metallurgy       11 Agitator  
two Mine       12 Rotary weeder  
three Device       thirteen Metallurgy   
4 Vitality       fourteen Compressor
5 Transmission     fifteen Petroleum sector
6 Water Conserbancy     16 Air Compressor
seven Tomacco       17 Crusher  
8 Healthcare       18 Materials
nine Packing     19 Electronics  
10 Chemical sector     20 Textile indutry
           
Power .06kw .09kw .12kw .18kw .25kw .37kw .55kw
.75kw 1.1kw one.5kw 2.2kw 3kw 4kw five.5kw
seven.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  much more
Colour Blue, Silver or as customers’ need to have
Materials Iron or Aluminium
Packing Carton with Plywood  Circumstance or as clients’ requirement
Type RV571 RV030 RV040 RV050 RV063 RV075 RV090
Fat .7kg 1.3kg two.3kg three.5kg six.2kg 9kg 13kg
Sort RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Set up
For various  mortor or double input/output shafts can be outfitted

Product image:

Construction:

Certification:

Packing & Delivery:

Our organization :
AOKMAN was launched in 1982, which has much more than 36 many years in R & D and production of gearboxes, gears, shaft, motor and spare areas.
We can offer the proper answer for uncountable programs. Our items are broadly used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol industry and different other types of machines with a strong presence in the intercontinental industry.
AOKMAN has turn into a reliable supplier, ready to provide substantial top quality gearboxes.With 36 several years expertise, we guarantee you the utmost dependability and protection for the two item and solutions.

Client going to:

FAQ:
one.Q:What kinds of gearbox can you make for us?
A:Principal products of our company: UDL collection pace variator,RV collection worm gear reducer, ATA sequence shaft mounted gearbox, X,B collection gear reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, far more
than 1 hundred types and thousands of specs
2.Q:Can you make as for each customized drawing?
A: Of course, we supply customized support for consumers.
three.Q:What is your conditions of payment ?
A: 30% Advance payment by T/T soon after signing the deal.70% just before supply
four.Q:What is your MOQ?
A: 1 Set
Make contact with:

Welcome you contace me if you are fascinated in our item.
Our staff will assistance any need you may well have.


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Industry
Function: Speed Reduction
Layout: Orthogonal
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step

###

Customization:
Available

|


###

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV025 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Industry
Function: Speed Reduction
Layout: Orthogonal
Hardness: Hardened
Installation: Horizontal Type
Step: Single-Step

###

Customization:
Available

|


###

SPEED RATIO 7.5~100
OUTPUT TORQUE <1050NM
IN POWER 0.09-11KW
MOUNTING TYPE FOOT-MOUNTED FLANGE-MOUNTED

###

When working, great load capacity, stable running, low noise with  high efficiency.
  Gear Box’s Usage Field
1 Metallurgy       11 Agitator  
2 Mine       12 Rotary weeder  
3 Machine       13 Metallurgy   
4 Energy       14 Compressor
5 Transmission     15 Petroleum industry
6 Water Conserbancy     16 Air Compressor
7 Tomacco       17 Crusher  
8 Medical       18 Materials
9 Packing     19 Electronics  
10 Chemical industry     20 Textile indutry
           
Power 0.06kw 0.09kw 0.12kw 0.18kw 0.25kw 0.37kw 0.55kw
0.75kw 1.1kw 1.5kw 2.2kw 3kw 4kw 5.5kw
7.5kw 11kw 15kw        
Torque 2.6N.m-3000N.m
Ratio 7.5-100, the double gearbox is  more
Color Blue, Silver or as customers’ need
Material Iron or Aluminium
Packing Carton with Plywood  Case or as clients’ requirement
Type RV025 RV030 RV040 RV050 RV063 RV075 RV090
Weight 0.7kg 1.3kg 2.3kg 3.5kg 6.2kg 9kg 13kg
Type RV110 RV130 RV150        
Weight 35kg 60kg 84kg        
Mounting Methods Foot Installation   Flange Installation
For various  mortor or double input/output shafts can be equipped

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Gear

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China RV Series Reduction Gear Machine with Right Angle Shaft     bevel gear setChina RV Series Reduction Gear Machine with Right Angle Shaft     bevel gear set
editor by CX 2023-03-28

Recent Posts